Creating A Multi-Waypoint Active Route - NorthStar MX500 Operator's & Installation Manual

Operator's Manual

Creating a Multi-Waypoint Active Route

There are four methods to create a multi-waypoint route:
Our experience has shown that you are likely to choose several of
these methods at any given time to create a route. You can mix any of
these routines to create routes, amend routes, or insert waypoints in
the middle of existing routes. The software is designed to be as flex-
ible as possible to meet your changing needs.
Be sure to take a few minutes to read through the Plotter section to
find out how you can modify the active route using the Plotter and
GOTO functions.
The following four sections are examples of how to use each of the
four basic functions outlined above. We encourage you to experiment
using all of the methods available to find the one that best meets your
needs. As long as you are working in the RTE1 screen and sitting at
the dock, you are not going to do any damage (e.g. erase waypoints
in the Waypoint Bank or routes in the Route Bank), so have some fun
and find out how helpful this GPS receiver really is.
If you are already comfortable with setting up a basic route, you might
want to skip the examples which follow and jump ahead to the Ma-
neuvering Within the Route section later in this section to understand
some of the more advanced features of the software.
38
Insert By Number - allows you to type in or scroll through in
numerical order using the cursor key, waypoints that you previ-
ously stored in the Waypoint Bank (see WPT later in this manual).
Choose In Bank - allows you to sort and scroll through the
waypoints stored in the Waypoint Bank (WPT) by various tech-
niques (symbol, date, distance from present position, numerical
order, alphabetical order, or search by user defined string). This
is a great tool if you can't remember where you stored the
waypoints you want to use.
Insert New Waypoint - allows you to define new waypoint coor-
dinates, define a waypoint by using Bearing and Distance from
an existing waypoint, and enter them into the route and the
Waypoint Bank at the same time.
Insert Route - allows you to copy a previously defined route in
the RTE2 screen to the active route. This choice is only dis-
played when one or more routes are defined in the RTE2 screen.
Route
Version 3.0