NorthStar MX500 Operator's & Installation Manual page 75

Waypoint
Lock/Unlock section for a step by step procedure, and then return to
this section.
To remove a waypoint:
1. Select the WPT key until the WPT1 screen is displayed.
2. Move the cursor to the desired waypoint.
3. Press the EDIT key.
4. Highlight the Remove softkey then press ENT.
There are three methods to remove a waypoint: Remove this WPT,
Remove Unused, and Remove Range:
5a. If you select Remove this WPT, the waypoint will immediately be
5b. If you select Remove Unused, the CDU will delete all waypoints
Version 3.0
removed from the Waypoint bank.
that are not locked or stored in a route. You will be prompted to
confirm the deletion:
5c If you select Remove Range, the CDU will delete all unlocked
waypoints that are not stored in a route between a range of
waypoint numbers that you enter. You will be prompted to
confirm the deletion:
Operator's Manual
61