NorthStar MX500 Operator's & Installation Manual page 71

Waypoint
7. Highlight the Done softkey and press ENT.
8. When you are finished, highlight the Lock this WPT softkey and
Note: Locked waypoints can not be overwritten by
Version 3.0
The following international characters are supported by cycling
through the standard letter function key:
ABC = Ä, Å, Æ, À, Ç
DEF = É, È
GHI = Í
MNO = Ñ, Ó, Ö
STU = Ú, Ü
Press the CFG key when in the edit mode to cycle through these
additional characters:
' " $ & ! ( ) ? / + - ° . , :
About one second after you stop scrolling through the alpha char-
acters, the cursor will automatically advance to the next space.
press ENT to avoid accidentally erasing the waypoint in the fu-
ture.
waypoints downloaded from the NMEA port or
saved by the Mark or MOB functions.
Operator's Manual
57