Table of Contents
Advertisement
Operator's Manual
Language - Language Configuration
The receiver supports 9 languages: English, Dutch, French, Finnish,
German, Italian, Spanish, Swedish and Danish
Press the EDIT key. Use the cursor key to scroll down the list until you
find the desired language. Press the EDIT key again. The CFG menu
list will sort the menu selections in alphabetical order based on the
language selected.
Lighting - Display/Keyboard Light & Contrast Control
There are two basic display setups. The light function key
you to instantly switch between two predefined screens (Daylight &
Nightlight).
Log - Speed Log Input (Pulse or NMEA 0183)
This screen controls the input port (NMEA-0183 or Pulse) and format
of the speed log input to the receiver. In the default condition, the
speed log is not connected. NMEA 0183 speed is accepted from the
xxVHW data sentence originating in any of the version 1.5, 2.0, 2.1, or
2.3 format where xx is a valid talker ID as specified in the NMEA 0183
standard. The receiver will also accept speed log pulse input, with
pulses of up to 1.5 kHz. Refer to the Appendix F of this manual for the
wiring interface instructions.
126
Configuration
allows
Version 3.0
Advertisement
Table of Contents
Troubleshooting
