Gps7 - Dgps Messages - NorthStar MX500 Operator's & Installation Manual

Operator's Manual
Once you have entered the data for several beacon stations, you can
cycle between these stations by pressing the Next Station or Previous
Station softkeys. These softkeys are only displayed if you have en-
tered a name for the reference station.
The window on the right side of the display indicates which satellite
ID's are receiving corrections. When the PRN number is shown in
inverse video, this indicates that the receiver is using the correction
in the navigation solution. The Corr value is the actual satellite range
measurement correction, given in meters. This value is typically be-
tween -20 and +20. The Age value indicates how long it has been
since the satellite range correction was generated, given in seconds.

GPS7 - DGPS Messages

This screen will display the Type 16 messages received from the
beacon station being used. These messages may contain information
regarding operational problems and status or any scheduled equipment
maintenance of beacon stations operating within the general area.
Note: The GPS screens are inactive if an MX antenna is not connected or
106
not detected.
GPS
Version 3.0