NorthStar MX500 Operator's & Installation Manual page 245

Installation Notes
11. Click OK when you are finished.
12. If the top of your program window says TCP/IP: Discon-
nected... wait for a few seconds until it says TCP/IP: Waiting
for Host... before moving onto Step 14.
If the top of your program window says TCP/IP: Waiting for
Host... immediately, then go ahead and move onto Step 13.
13. Leave the MX500 Series Software Update program alone for
now and go to the MX 500 unit. Press and hold down the NAV
button on the MX 500 unit and power on the unit.
(Release the 'NAV' key after the unit is powered on.)
Version 3.0
Installation Manual
231