Goto - NorthStar MX500 Operator's & Installation Manual

Operator's Manual
GOTO O
Using the GOTO function key is the fastest way to create a single leg
route. This method will cause the existing active route to be erased
and overwritten with the new position you define.
1. From any screen press the GOTO key.
2. Press the EDIT key.
3. Select the waypoint determination method you want:
72
Waypoint Number - allows you to choose a waypoint stored in the
Waypoint Bank, where you enter the waypoint number.
Choose in Bank - as used in the Route function (refer to Route -
Choose In Bank section of the manual), allows you to view
waypoints in the Waypoint Bank as a list.
Lat. Lon., UTM- allows you to define a coordinate and descrip-
tion, which is also stored at the next available waypoint loca-
tion in the Waypoint Bank.
Bearing Range - allows you to define a coordinate by specifying
the bearing and range from your present position, which is
also stored at the next available waypoint location in the
Waypoint Bank.
If you make a mistake, you can use the cursor key to position the
cursor over the mistake and overwrite the error.
Use the DGPS key or cursor key to insert a space in the descrip-
tion, if needed.
Use the CFG key to select a special character, if needed.
Plot
Version 3.0