Inserting Waypoints Or Routes Into An Existing Route - NorthStar MX500 Operator's & Installation Manual

Operator's Manual
Use the up ( ) softkey to unpass or the down ( ) softkey to pass
waypoints in the route until the waypoint marked by the cursor is
displayed with white characters on a black background (Daylight
display, see CFG1 Lighting).
Press the EDIT key to end editing.
If for some reason you can't select the waypoint you want (the screen
keeps passing waypoints you unpassed), you are probably too close to
one of the waypoints. You will need to either change your Waypoint
Pass Criteria, change your Waypoint Pass Distance (see CFG1 Navi-
gation), or remove the waypoint from the route.

Inserting Waypoints or Routes into an Existing Route

1. Select the RTE key until the RTE1 screen is displayed.
2. Scroll through the route with the cursor key until the cursor ar-
44
row is at the bottom of the waypoint you want to insert the new
waypoint after.
Route
Version 3.0