To Unlock A Waypoint; To Lock All Waypoints - NorthStar MX500 Operator's & Installation Manual

Waypoint
4. Highlight the Lock this WPT softkey then press ENT.
5. Press the EDIT key.

To Unlock a Waypoint

1. Select the WPT key until the WPT1 screen is displayed.
2. Move the cursor to the desired waypoint.
3. Press the EDIT key.
4. Highlight the Unlock this WPT softkey then press ENT.
5. Press the EDIT key.

To Lock all Waypoints

1. Select the WPT key until the WPT1 screen is displayed.
2. Move the cursor to the desired waypoint.
3. Press the EDIT key.
4. Highlight the More softkey and press ENT.
5. Highlight the More softkey again and press ENT.
Version 3.0
If you simply want to modify the waypoint, Edit this WPT will be
displayed on the bottom left of the screen.
Operator's Manual
59