Lan Output - NorthStar MX500 Operator's & Installation Manual

Configuration
LAN Output (NMEA 0183 OVER IP)
This screen is very similar to the NMEA Out screens. It sets the
specific NMEA 0183 output record parameters. The default setting is
No. When this selection is changed to Yes, you can turn on individual
data records, and transmit using the Local Area Network (LAN) con-
nection.
This feature can be used to integrate the MX 500 to an Integrated
Bridge System by connecting the CDU to a PC-based IBS system
using LAN (RJ45).
Note: CFG1/LAN must be setup before using this feature.
Please refer to page 118 for setup details.
Version 3.0
Operator's Manual
119