Moving Waypoints - NorthStar MX500 Operator's & Installation Manual

Operator's Manual

Moving waypoints

This feature allows you to create a range of waypoints within a par-
ticular area. For example, you could put all of the waypoints for fish-
ing spots near Catalina Island in the range of 500 to 530, all the
waypoints for Cabo San Lucas in the range of 575 to 600, etc.
To move a waypoint or range of waypoints:
1. Select the WPT key until the WPT1 screen is displayed.
2. Press the EDIT key.
3. Highlight the More softkey then press ENT.
4. Highlight the Move softkey then press ENT.
5a. To move a single waypoint, enter the original waypoint number
5b. To move a range of waypoints, enter the first and last waypoint
62
6. Press the EDIT key.
on the First WPT Number and Last WPT Number.
numbers to move on the First WPT Number and Last WPT Num-
ber. Keep in mind that the CDU will sort these waypoints nu-
merically and all waypoints between the entered numbers will be
moved to the new location.
Waypoint
Version 3.0