Choose In Bank - NorthStar MX500 Operator's & Installation Manual

Operator's Manual

Choose in Bank

The following example assumes RTE1 is empty. Follow the direc-
tions in the Erasing an Existing Route section to start with an empty
route if you have waypoints in the RTE1 screen.
1. Select the RTE key until the RTE1 screen is displayed.
2. Press the EDIT key to enter the edit mode.
3. Highlight the Insert softkey from the display and press ENT. Skip
4. Highlight Choose in Bank from the display and press ENT.
5. Select a waypoint by:
40
to the next step if RTE1 is empty.
A. Highlight the Sort By softkey and press ENT to arrange the
waypoints by number, name, type, distance, or age (refer to
the Waypoint section for a full description), then using the
cursor key to scroll through the previously stored waypoints in
the Waypoint Bank.
B. Highlight the Search for WPT softkey and press ENT. When
using this selection you actually spell out the name and or
symbols of the waypoints you are looking for and the software
will display any waypoint containing that combination of char-
acters or symbols. Refer to the Waypoint section for a full
description.
Route
Version 3.0