NorthStar MX500 Operator's & Installation Manual page 70

Operator's Manual
5. Enter the appropriate coordinates using the cursor key and nu-
6. Move the cursor down and modify the waypoint number if you
7. Move the cursor down, and enter the symbol and name informa-
56
meric keypad.
wish. Otherwise the CDU assigns the next available number, be-
ginning at 1.
Range & Bearing
This feature allows you to create a range of waypoints within a
particular area. For example, you could put all of the waypoints
for fishing spots near Catalina Island in the range of 500 to 530,
all the waypoints for Cabo San Lucas in the range of 575 to 600,
etc.
tion (optional). Use the techniques described in the EDIT keypad
& Display Description section at the front of this manual.
Lat/Lon
Version 3.0
Waypoint