Reversing The Active Route - NorthStar MX500 Operator's & Installation Manual

Operator's Manual
3. Use the cursor key to move the magnifying glass icon over the
4. Press the GOTO function key.
5. Press the EDIT key to exit the edit mode.
Note that RTE1 and PLOT1 are updated with your new waypoint.

Reversing the Active Route

Once you get to your final destination, you might want to follow the
same route home. To quickly accomplish this, simply use the Re-
verse Direct softkey from the main RTE1 menu.
1. Select the RTE key until the RTE1 screen is displayed.
2. Press the EDIT key.
3. Highlight the Route Control softkey and press ENT.
46
waypoint or marker that you want to go to.
Verify that the waypoint number and coordinates are correct in
the left hand window.
Route
Version 3.0