NorthStar MX500 Operator's & Installation Manual page 113

Position
The lower left window is also the same as POS2 and displays your
course and speed over ground. If the degree symbol has a small c
under it, this indicates that the magnetic variation and compass de-
viation table are being calculated and displayed. Refer to the CFG
Compass section for more details on how to set this up.
The right hand window indicates your accumulated mileage since
the CDU was first turned on.
You will also find two Trip Reset softkeys if you press the EDIT key.
Two trip logs are provided so that you can log the mileage for:
a) the current leg or day of your trip; and
b) the entire trip.
You will also find a flashing cursor on the second line in the Trip
Log. This is provided so that you can label what type of mileage you
are logging. Edit this field the same way you would any of the de-
scription fields for the waypoints.
Version 3.0
Operator's Manual
99