Locus - NorthStar MX500 Operator's & Installation Manual

Configuration

Locus:

To implement this feature, change LORAN-C connected to Yes.
Identify the appropriate input port (1 or 2) where the LORAN-C device
connects to by using the Change softkey.
Select the chain selection mode, either Auto or Manual.
Auto:
When the chain selection mode is Auto, you can view the list of
current chains by using the left or right arrow key to highlight the List
Chains softkey and press the ENT key to select. You can also choose
the desired region by using the left or right arrow key to highlight the
Change softkey and press the ENT key to select.
Manual:
Select this option to manually add or remove the list of chains. To add
a chain, use the left or right arrow key to highlight the Add Chain
softkey, and press the ENT key to select. Enter the 4 digits chain GRI
then select the Done softkey to add the chain. To remove a chain, use
the left or right arrow key to highlight the Remove Chain softkey, and
press ENT to select. Enter the 4 digit chain GRI and select the Done
softkey to remove the chain.
Version 3.0
Operator's Manual
123