NorthStar MX500 Operator's & Installation Manual page 59

Route
3. Then press the EDIT key.
4. Use one or more of the insert methods described in the Creating a
This example shows Waypoint 7 inserted into the route using the
Insert by Number method:
5. Press the EDIT key to end editing.
There is one special way to add a waypoint to the active route using
the Plotter display. This method adds the waypoint between your
present position and the next waypoint in your active route.
1. Select either PLOT1 or PLOT2 display.
2. Use the UP arrow (zoom-out) or DOWN arrow (zoom-in) key
Version 3.0
Multi-Waypoint Active Route section above.
to display the waypoint you want to insert. Press the EDIT key.
All waypoints in the waypoint bank will be displayed if they are
within the zoom level of the display.
Note that the waypoint must have a symbol as the first character
of the waypoint name in order for it to be displayed on the PLOT
screen when the edit mode is not active.
Operator's Manual
45