Siemens SINUMERIK 840D sl Operating Manual page 12

Introduction
2.1 Scope of functions and supported SINUMERIK control systems
● Comparing and loading archives with the aid of the SINUMERIK Integrate "Create MyConfig
- Diff" software.
● Managing the OEM files mentioned above with the following options (Page 89):
– Creating a project OFFLINE.
– Creating a project for which the OEM files mentioned above are automatically copied
– Copying individual files using the project dialog to the control or copying from the control
– Deleting the OEM files using the project dialog on the control.
● Converting alarm texts from powerline format to solution line format.
● CNC lock function
Using the CNC lock function, you can activate, extend or deactivate a date in the control
as of which the NC Start is locked.
Supported SINUMERIK controls
The following SINUMERIK controls are supported:
● SINUMERIK 840D sl (NCUs)
● SINUMERIK 828D (PPUs)
● SINUMERIK 808D (as of AMM version 4.6, PPU141.2 and PPU161.2)
Foreign languages
● The AMM itself can be switched into various interface languages. The following languages
are available:
– German
– English
– Chinese (Simpl.)
– Chinese (Trad.)
– Spanish
– Italian
– French
– Portuguese (Braz.)
– Japanese
– Korean
– Russian
● The HMI of the control can also handle several language packages and the associated
language selection. The creation and installation of such language packages and/or
individual language files is supported by the AMM in the project.
12
from the control.
to the project.
SINUMERIK Integrate Access MyMachine /P2P (PC)
Operating Manual, 11/2016, A5E39356962B AA