Siemens SINUMERIK 840D sl Operating Manual page 28

Connection to the control
5.2 Assigning the connection parameters
Operating sequence
1. Press the "Connection" icon.
- OR -
Select "Connection > Connect..." in the main window menu. The following dialog appears:
Figure 5-4
2. Press "New" to create a new connection.
3. Select a suitable connection name.
4. When establishing a network connection to the control, select the IP address and the port
22 of the control.
28
Network connection
SINUMERIK Integrate Access MyMachine /P2P (PC)
Operating Manual, 11/2016, A5E39356962B AA