Siemens SINUMERIK 840D sl Operating Manual page 117

3. In the project dialog, in each substructure (Alarm texts, EasyScreen, etc.), activate the
checkbox for the files that you want to copy to the control.
Figure 6-33
4. Then click the "Transfer to control" button.
Note
As it does not make sense to copy files to the control if the control type is different to that
in the project, in such a case a corresponding error message is output.
5. If the control types match, then you are prompted as to whether color and configuration
files should also be copied. Select "Yes" if the files should also be copied, otherwise select
"No".
SINUMERIK Integrate Access MyMachine /P2P (PC)
Operating Manual, 11/2016, A5E39356962B AA
Project dialog (ONLINE)
Operator control (software)
6.2 Project
117