Operator control (software)
6.2 Project
Operator action "With a double-click on the project file"
1. Navigate in the file display of AMM to the storage location of the project to be opened.
Figure 6-16
AMM (OFFLINE and without project)
2. Open the project with Open from the shortcut menu or by double-clicking the *.rcsproj file.
3. The project is then displayed in the project dialog. The name of the active, open project
appears at the top, in the title bar of the program.
98
SINUMERIK Integrate Access MyMachine /P2P (PC)
Operating Manual, 11/2016, A5E39356962B AA