Connection to the control
5.5 Establishing a modem connection
6. Select "Connection" > "Current connection" to observe the status of the connection currently
established (see figure).
Figure 5-25
7. Parameter assignment for your TS Adapter is now complete.
Make the following changes to the cabling (Page 60).
Connect the control system for X127 with the TS Adapter.
The PC should be already connected with the modem cable and the TS Adapter with the
other modem cable.
58
Current connection
SINUMERIK Integrate Access MyMachine /P2P (PC)
Operating Manual, 11/2016, A5E39356962B AA