Stack-S (Ncp) Card (Kx-Ns0131) - Panasonic KX-NS1000 Installation Manual

4.6.2 STACK-S (NCP) Card (KX-NS0131)

4.6.2 STACK-S (NCP) Card (KX-NS0131)
Function
A stacking card to be installed in the MPR card slot of a KX-NCP500 or KX-NCP1000 to be used as a legacy
gateway.
This card can be used only with PCMPR Software Version 002.01000 or later.
LED
Accessories and User-supplied Items
Accessories (included): Stacking cable ´ 1
User-supplied (not included): None
WARNING
A lithium battery is used in the STACK-S (NCP) card. There is a risk of explosion if the battery is
replaced with an incorrect type. Dispose of used batteries according to the manufacturer's
instructions.
CAUTION
When installing or removing this card, the power switch must be turned off.
Notice
When stacking other PBXs with the KX-NS1000, place them well within reach of the stacking cable (2 m).
LED Indications
STACK-S (NCP) Card
Indication
CARD STATUS
152 Installation Manual
Stacking Connector
To STACK-M Card
Colour
Green
Red
STACK-S (NCP) card status indication
•
ON: INS (In Service)
STACK-S (NCP) card status indication
•
ON: Fault
•
Flashing: OUS (Out of Service)
Description