Table of Contents
Advertisement
Figure 75. Installing a processor and heat sink module
Next steps
1.
Install the air
shroud.
2.
Install the
sled.
3. Follow the procedure listed in
Removing the fabric processor from the processor heat sink
module
Prerequisites
WARNING:
The heat sink may be hot to touch for some time after the system has been powered off. Allow the
heat sink to cool before removing it.
NOTE:
This procedure is only for replacing a heat sink or a processor. This procedure should not be followed while replacing
a system board.
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in the
3.
Remove the air
shroud.
4.
Remove the processor and heat sink
After working inside the
system.
Safety
instructions.
Before working inside your
module.
system.
Installing and removing system components
107
Hide quick links:
Advertisement
Table of Contents
