Mac Acl Configuration Example - D-Link DWC-1000 User Manual

Wireless controller

Hide thumbs Also See for DWC-1000:

Table of Contents

Section 4 - Advanced WLAN Configuration

MAC ACL Configuration Example

Example: To block the traffic between the two wireless clients, STA1 (station 1) and STA2 (station 2) using the

The topology required for this configuration is as follows:

Follow the following steps:

1. Go to Wireless > ACL > MAC ACL page, and click Add New MAC ACL.

2. Enter a MAC ACL Name, and click Save.

D-Link DWC-1000 User Manual