All Aps - D-Link DWC-1000 User Manual

Section 8 - Viewing Status and Statistics
Path: Status > Wireless Information > Access Point > All APs
The All APs List page shows summary information about managed, failed, and rogue access points the wireless
controller has discovered or detected. Status entries can be deleted manually.
Field
MAC Address
IP Address
Age
Status
Radio
Channel
D-Link DWC-1000 User Manual

All APs

MAC address of the access point.
IP address of the access point.
Amount of time that has passed since the access point was last detected and
the information was last updated.
Access point status. Possible values are:
• Managed = access point profile configuration has been applied to the
access point and the access point is operating in managed mode.
• No Database Entry = access point's MAC address does not appear in the
local or RADIUS Valid AP database.
• Authentication (Failed AP) = access point failed to be authenticated by
the wireless controller or RADIUS server.
• Failed = wireless controller lost contact with the access point. A failed
entry will remain in the Managed AP database unless you remove it. Note:
a managed access point shows a failed status temporarily during a reset.
• Rogue = access point has not tried to contact the wireless controller and
the access point's MAC address is not in the Valid AP database.
Wireless radio mode the access point is using.
Operating channel for the radio.
Description
306