Configure Ap Profile Ssid - D-Link DWC-1000 User Manual

Section 4 - Advanced WLAN Configuration
Path: Wireless > Access Point > AP Profiles > AP Profile SSID
The AP Profile SSID List page displays the virtual access point (VAP) settings associated with the selected AP
profile. Each VAP is identified by its network number and Service Set Identifier (SSID). You can configure and
enable up to 16 VAPs per radio on each physical access point.
1. Click Wireless > Access Point > AP Profiles > AP Profiles SSID tab.
2. Select the AP Profile from the drop-down menu.
3. Select the Radio Mode.
4. Select the SSID name from the drop-down menu.
5. Enable/disable the SSID by right-clicking Enable or Disable.
Note: SSID ID 1 is always enabled. If you do not want to have the first SSID enabled, you must create a new
SSID to be able to swap another SSID in the first slot.
D-Link DWC-1000 User Manual

Configure AP Profile SSID

113