D-Link DWC-1000 User Manual page 36

Section 3 - Basic Configuration
6. Click Wireless > Access Point > AP Profiles. Click on the AP Profile SSID tab on the middle menu. The
Access Point Profiles SSID List will appear.
7. Select the SSID you wish to edit from the AP Profile drop-down menu.
8. Click the radio button next to the Radio Mode you prefer.
9. Select the SSID you wish to configure on the radio from SSID Name drop-down menu or right-click the
SSID network you want to enable, and click Enable on the AP Profile SSID List.
Note: SSID ID 1 is always enabled. If you do not want to have the first SSID enabled, you must create a new
SSID to be able to swap another SSID in the first slot.
D-Link DWC-1000 User Manual 36