Configure Wds Ap Link - D-Link DWC-1000 User Manual

Section 4 - Advanced WLAN Configuration
Path: Wireless > Access Point > WDS Groups > WDS AP Link
After you create a WDS‐Managed AP group, use the WDS AP Link Configuration page to configure the WDS links
between the APs that are members of the group.
1. Click Wireless > Access Point > WDS Groups > WDS AP Link tab.
2. Click Add New WDS AP Link.
3. Complete the fields in the table below and click Save.
Field
WDS Managed Group ID
Source AP MAC Address
Source AP Radio
Destination AP MAC Address The MAC address of the destination AP in the group.
Destination AP Radio
Link Cost
D-Link DWC-1000 User Manual

Configure WDS AP Link

Select the ID associated with the group to configure.
MAC Address of the source AP.
Note: The WDS links are bidirectional. The terms Source and Destination simply help to
differentiate between the WDS link endpoints.
The radio number of the WDS link endpoint on the source AP.
The radio number of the WDS link endpoint on the destination AP.
Spanning Tree Path cost for the WDS link. The range is 0–64.
When multiple alternate paths are defined in the WDS group, the link cost is used to
indicate which links are the primary links and which links are the secondary links. The
spanning tree selects the path with the lowest link cost.
Description
127