D-Link DWC-1000 User Manual page 106

Section 4 - Advanced WLAN Configuration
3. Complete the fields in the table below, and click Save.
Field
Profile Name
Hardware Type
Wired network Discovery VLAN ID
Radio Mode 802.11a/n
Radio Mode 802.11b/g/n
QoS Radio Mode 802.11a/n
QoS Radio Mode 802.11b/g/n
D-Link DWC-1000 User Manual
AP Profile Global Configuration
Identifies the name of the configured profile.
Hardware type for the APs that use this profile. The hardware type is determined,
in part, by the number of radios the AP supports (single or dual) and the IEEE
802.11 modes that the radio supports (a/b/g or a/b/g/n). The available options
are:
• Any
• DWL-8600AP Dual Radio a/b/g/n
• DWL-3600AP Single Radio b/g/n
• DWL-3610AP Single Radio a/b/g/n/ac
• DWL-6600AP Dual Radio a/b/g/n
• DWL-2600AP Single Radio b/g/n
• DWL-8610AP Dual Radio a/b/g/n/ac
• DWL-6610AP Dual Radio a/b/g/n/ac
• DWL-6700AP Dual Radio a/b/g/n
• DWL-8710AP Dual Radio a/b/g/n/ac
LAN ID that the controller uses to send tracer packets in order to detect APs
connected to the wired network.
Configure AP Profile Radio 1
In a new AP Profile, you can edit the radio 802.11a/n from here. You can also edit
it from AP Profile Radio.
Configure AP Profile Radio 2
In a new AP Profile, you can edit the radio 802.11b/g/n from here. You can also
edit it from AP Profile Radio.
Configure AP Profile QoS Radio 1
In a new AP Profile, you can edit the QoS on radio 802.11a/n from here. You can
also edit it from AP Profile Radio.
Configure AP Profile QoS Radio 2
In a new AP Profile, you can edit the QoS on radio 802.11b/g/n from here. You can
also edit it from AP Profile Radio.
Description
106