Internet Connection Wizard - D-Link DWC-1000 User Manual

Section 11 - Wizard
The Internet Connection Setup Wizard is available for users new to networking. By going through a few
straightforward configuration pages, you can take the information provided by your ISP to get your Option
connection up, and enable internet access for your network.
Please follow the procedure given below:
1. You can start using the Wizard by logging in with the administrator password for the controller.
2. Once authenticated, set the time zone that you are located in, and then choose the type of ISP connec-
tion: DHCP, Static, PPPoE, PPTP, and L2TP.
3. Depending on the connection type, a username/password may be required to register this controller
with the ISP.
4. In most cases, the default settings can be used if the ISP does not specify that parameter.
D-Link DWC-1000 User Manual

Internet Connection Wizard

362