Round Robin - D-Link DWC-1000 User Manual

Section 5 - Advanced Network Configuration
1. Click Network > Internet (IPv4) > Option Mode.
2. Complete the fields from the table below and click Save.
Field
Option Mode
Load Balancing
DNS Lookup Method
Save
D-Link DWC-1000 User Manual

Round Robin

Select Load Balancing from the drop-down menu.
Select Round Robin.
• Option DNS Servers: DNS Lookup of the DNS Servers of the primary link is used to detect
primary Option connectivity.
• DNS Servers: DNS Lookup of the custom DNS Servers can be specified to check the connectivity
of the primary link.
• Ping these IP addresses: These IP's will be pinged at regular intervals to check the connectivity
of the primary link.
• Retry Interval is: The number tells the controller how often it should run the above configured
failure detection method.
• Failover after: This sets the number of retries after which failover is initiated.
Click save to activate your settings.
Description
164