Basic Configuration Procedures - D-Link DWC-1000 User Manual

Section 3 - Basic Configuration

Basic Configuration Procedures

To perform common basic configuration procedures, follow the steps below:
• "Step #1: Enable DHCP Server (Optional)" on page 28
• "Step #2: Configure Country Code" on page 29
• "Step #3: Select APs to be Managed" on page 30
• "Step #4: Change the SSID and Set Up Security" on page 32
• "Step #5: Select MAC Authentication Mode" on page 37
• "Step #6: Confirm Access Point Profile is Associated" on page 39
• "Step #7: Configure Captive Portal Settings" on page 40
• "Step #8: Use SSID with RADIUS Sever as Authenticator" on page 48
• "Step #9: Configure Guest Management" on page 49
D-Link DWC-1000 User Manual 27