D-Link DWC-1000 User Manual page 286

Section Description
Graphical representation of total APs in connected, disconnected, and
Connection failure state.
(X/Y) X: represents number of AP managed by controller. Y: represents number
Memory AP Status (X/Y)
of total AP supported by the controller, based on the licenses installed.
Click on Details to get a list of APs with Model Name, Firmware, MAC Address,
IP Address, Location, Status, and System UpTime.
Graphical representation of Top 5 AP Utilization based on the individual WLAN
traffic.
WLAN Traffic shows the MB traffic consumption of AP. RF Utilization shows
RF Utilization percentage (2.4 GHz and 5 GHz) of AP. Authenticated Clients
Top 5 AP Utilization
show associated clients to AP.
Click on Details to get detailed AP Statistics including Model Name, IP Address,
Location, MAC Address, Firmware, AP Up Time, Auth. Clients, WLAN Traffic, RF
Utilization 5G, and RF Utilization 2.4G
Graphical representation of total memory utilization. Click on Details to get
Controller Memory Utilization
detailed numbers of Total Memory, Used Memory, Free Memory, Cached
Memory, Buffer Memory in MBs.
Graphical representation of Top 5 Client based on the individual WLAN traffic.
Click on Details to get detailed Client Statistics including Client IP Address,
Top 5 Client Traffic
Client MAC Address, SSID, AP MAC Address, AP Location, Channel, NetBIOS, Rx
Traffic (MB), and Tx Traffic (MB)
Percent of the CPU utilization currently consumed by the device. The CPU
Controller CPU Utilization utilization is broken down into specifics such as all user space processes, such
as management operations, kernel space processes, and CPU idle time or IO.
Graphical representation of total connected clients of different groups.
Click on Details to get detailed counts of Admin Users Logged in, Guest Uses
Users Info
Logged in, Captive Portal uses Logged in, Front Desk Users Logged in, SSLVPN
Users Logged in, PPTP Users Logged in, and L2TP Users Logged in.
Graphical representation of traffic generated using these protocols http,
email, IPsec, https. Click on Details to get detailed traffic in KB for different
Traffic Overview
protocols such as HTTP, HTTPs, DNS, IMAP2, IMAP3, NFS, POP3, SMTP, SNMP,
SSH, and TELNET of all interfaces.
Displays bandwidth usage by network segment such as WLAN or LAN. The
Bandwidth Usage
data is broken into by applications service such as HTTP, HTTPS, DNS, SNMP,
and others.
Displays the current number of concurrent and active IPsec and SSL VPN
VPN's
sessions.
Displays a grid of traffic statistics (incoming, outgoing, dropped in and
Traffic Information
dropped out packets) for each interface.
D-Link DWC-1000 User Manual 286