Port Forwarding - D-Link DWC-1000 User Manual

Section 7 - VPN
Port forwarding allows remote SSL users to access specified network applications or services after they login to
the User Portal and launch the Port Forwarding service. Traffic from the remote user to the switch is detected and
re-routed based on configured port forwarding rules.
Internal host servers or TCP applications must be specified as being made accessible to remote users. Allowing
access to a LAN server requires entering the local server IP address and TCP port number of the application to be
tunnelled.
To add a port forwarding rule:
1. Click VPN > SSL VPN > Resources.
2. Click Add New Rule under either Port Forwarding List for Configured Applications (TCP Port) or under
Port Forwarding List for Configured Host Names (FQDN).
3. Enter the IP address of the local server.
4. Next enter either the TCP port number or the domain name (FQDN).
5. Click Save.
D-Link DWC-1000 User Manual

Port Forwarding

273