Configure Ipv6 Static Routing - D-Link DWC-1000 User Manual

Section 5 - Advanced Network Configuration
Path: Network > IPv6 > Static Routing
Manually adding static routes to this device allows you to define the path selection of traffic from one interface
to another. There is no communication between this controller and other devices to account for changes in the
path; once configured the static route will be active and effective until the network changes.
The List of Static Routes displays all routes that have been added manually by an administrator and allows several
operations on the static routes. The List of IPv4 Static Routes and List of IPv6 Static Routes share the same fields
(with one exception):
To configure IPv6 Static Routing:
1. Go to Network > IPv6 > Static Routing page.
2. Click Add New IPv6 Static Route.
D-Link DWC-1000 User Manual

Configure IPv6 Static Routing

179