Ospf - D-Link DWC-1000 User Manual

Section 5 - Advanced Network Configuration
Path: Network > Routing > OSPF
OSPF is an interior gateway protocol that routes Internet Protocol (IP) packets solely within a single routing
domain. It gathers link state information from available controllers and constructs a topology map of the network.
OSPF version 2 is a routing protocol which described in RFC2328 - OSPF Version 2. OSPF is IGP (Interior Gateway
Protocols). OSPF is widely used in large networks such as ISP backbone and enterprise networks.
To configure OSPF:
1. Click Network > Routing > OSPF.
2. Right-click the port you want to edit (LAN/Option1/Option2), and click Edit.
3. Complete the fields given in the table on the next page, and click Save.
D-Link DWC-1000 User Manual

OSPF

182