D-Link DWC-1000 User Manual page 382

Section 10 - Troubleshooting
Authentication with SMTP
Server
Field
User Name
Enable Tls
Password
Respond to Identd from SMTP
To receive e-mail logs according to a schedule, configure the appropriate schedule settings. Scheduling options are
enabled when the Enable E-Mail Logs option is checked.
Unit
Day
Time
D-Link DWC-1000 User Manual
If E-Mail Logs is enabled, select an authentication if the SMTP server requires
authentication before accepting connections. Choices are:
• None = no authentication is used. The User Name and Password fields are not
available.
• Login Plain = authentication used to log in using Base64-encoded passwords
over non-encrypted communication session. Base64-encoded passwords offer
no cryptographic protection, making them vulnerable.
• CRAM-MD5 = a challenge-response authentication mechanism defined in RFC
2195 based on the HMAC-MD5 MAC algorithm. CRAM-MD5 offers a higher level
of authentication than Login Plain.
If Authentication with SMTP Server is set to Login Plain or CRAM-MD5, enter the user
name to be used for authentication.
If the SMTP server requires Tls support to sent logs through emails, then this option
should be enabled, and this field is available only for authentication methods Plain
Login or CRAM-MD5.
If Authentication with SMTP Server is set to Plain Login or CRAM-MD5, enter the
case-sensitive password to be used for authentication.
If E-Mail Logs is enabled, this option determines whether the wireless controller
responds to IDENT requests from the SMTP server. Choices are:
• ON = wireless controller responds to an IDENT request from the SMTP server.
• OFF = wireless controller ignores IDENT requests from the SMTP server.
Send E-Mail Logs by Schedule
Select the period of time that you need to send the log. This option is useful when you
do not want to receive logs by e-mail, but want to keep e-mail options configured,
so you can use the Send Log function Event Log viewer pages. Choices are:
• Never = disable sending of logs.
• Hourly = send logs every hour.
• Daily = send logs every day at the specific time.
• Weekly = send logs weekly, at the Day and Time specified.
If Unit is set to Weekly, select the day when logs will be sent.
If Unit is set to Daily or Weekly, select the time when logs will be sent.
Description
382