Wds Group Ap Status - D-Link DWC-1000 User Manual

Section 8 - Viewing Status and Statistics
Path: Status > Wireless Information > WDS Groups Status > WDS Group AP Status
The WDS AP Group Status page displays detailed information about the configured APs and links in the WDS
Group. From this page, you can also send a new password to group members.
Field
ID
Configured AP Count
Connected AP Count
Source AP Count
Destination AP Count
Source Bridge AP MAC
Source Device Type
Config WDS Link Count
Detect WDS Links Count
D-Link DWC-1000 User Manual

WDS Group AP Status

Unique number that identifies the WDS AP group.
Number of APs configured in this WDS AP group.
Number of APs managed by the controller that are members of this WDS AP
Group. This number is the sum of the Connected Root APs and Connected
Satellite APs.
Number of Root APs currently being managed by the controller that are
members of this WDS AP Group.
Number of Satellite APs currently being managed by the controller that are
members of this WDS AP Group.
MAC Address of the device elected as the Spanning Tree Root Bridge. If
spanning tree is disabled this value is 00:00:00:00:00:00.
The type of device elected as the Spanning Tree Root bridge:
• None (STP is disabled)
• Root AP
• Satellite AP
• External Device (STP Root is not one of the APs)
Number of configured bidirectional links in the WDS AP Group.
Number of WDS links detected in the system. APs on both sides of the link
must detect each other in order for the link to be counted.
Description
327