D-Link DWC-1000 User Manual page 237

Section 8 - Security
3. Complete the fields from the table below and click Save.
Field
From Zone
To Zone
Service
Action
Source Hosts
Destination Hosts
Log
QoS Priority (IPv4 only)
D-Link DWC-1000 User Manual
Select the source of originating traffic: either secure LAN, public DMZ, or insecure Option.
For an inbound rule Option should be selected.
Select the destination of traffic covered by this rule. If the From Zone is the Option, the To
Zone can be the public DMZ or secure LAN. Similarly if the From Zone is the LAN, then the
To Zone can be the public DMZ or insecure Option.
Select a service from the drop-down menu. ANY means all traffic is affected by this rule.
Select an action from the drop-down menu.
Select a source host. If you select Single Address or Address Range, you will need to enter
the IP address or IP range.
Select a Destination host. If you select Single Address or Address Range, you will need to
enter the IP address or IP range.
Select whether to log firewall traffic or not.
Outbound rules (where To Zone = insecure Option only) can have the traffic marked with a
QoS priority tag. Select a priority level:
• Normal-Service: ToS=0 (lowest QoS)
• Minimize-Cost: ToS=1
• Maximize-Reliability: ToS=2
• Maximize-Throughput: ToS=4
• Minimize-Delay: ToS=16
Description
237