D-Link DWC-1000 User Manual page 134

Section 4 - Advanced WLAN Configuration
Status (per-AP)
AP MAC
Location
Status
Firmware Version
D-Link DWC-1000 User Manual
AP Firmware Status
A table also appears and lists each AP, its download status, and the software version it
is downloading. The status for an individual AP can have one of the following values:
• Requested: A download is planned for this AP, but the AP is not in the current
download group, so it hasn't been told to start the download yet.
• Code‐Transfer‐In‐Progress: The AP has been told to download the code.
• Failure: The AP reported a failing code download.
• Aborted: The download was aborted before the AP loaded code from the TFTP
server.
• Waiting‐For‐APs‐To‐Download: A download finished on this AP, and it is waiting for
other APs to finish download. Reset command is not sent to the AP in this state.
• NVRAM‐Update‐In‐Progress: Download completed successfully. The reset
command sent to the AP.
• Timed‐Out: The AP did not reconnect to the controller in the fixed time interval.
The managed AP MAC address.
The location of the managed AP.
Refer to Status (per-AP) above.
The current firmware version of the managed AP.
134