Mac Acl Rules - D-Link DWC-1000 User Manual

Section 4 - Advanced WLAN Configuration
Path: Wireless > ACL > MAC ACL Rules
You can configure the rules for the MAC Access Control Lists created using the MAC Access Control List Con-
figuration page. The fields on this page varies depending on the current step in the rule configuration process.
Use the MAC ACL Rule Configuration page to define rules for MAC based ACLs. The access list definition in-
cludes rules that specify whether traffic matching the criteria is forwarded normally or discarded. A default
"deny all" rule is the last rule of every list. The fields available on the configuration page depend on whether
the rule action is permit or deny, and whether you select Create Rule or an existing rule from the Rule field.
To configure MAC ACL Rule:
1. Go to Wireless > ACL > MAC ACL Rules page.
2. Click Add New Rule.
3. Fill-in the fields (refer to the below table), and click Save.
Field
Rule ID
Action
D-Link DWC-1000 User Manual

MAC ACL Rules

This field is available only if you select Add New Rule to configure a new ACL Rule.
Enter a new Rule ID which is a whole number in the range from 1-127 that will be
used to identify the rule.
Select the ACL forwarding action. Select the desired action from the following two
options:
• Permit: Forward the packets which meet the ACL criteria.
• Deny: Drops the packets which meet the ACL criteria.
Description
79