Front Panel; Rear Panel - D-Link DWC-1000 User Manual

Section 1 - Product Overview
1
1 Power LED
2 USB Ports
3 LAN Ports (1-4)
4 Option Ports (1-2)
5 Console Port
1 Reset Button
2 Power Port
3 On/Off Switch
D-Link DWC-1000 User Manual

Front Panel

2
A solid green light indicates a good connect to a power source. This LED will be
orange during boot up.
Two Universal Serial Bus (USB) 2.0 ports are provided for connecting USB flash drives,
hard drives, and printers. A solid LED indicates the USB device is attached. This LED will
blink during data transmission.
Four Gigabit Ethernet ports labeled 1 through 4 let you connect Ethernet devices such
as computers, switches, and network storage (NAS) devices. Each port has an Activity
LED (left) and Link LED (right).
Two Gigabit Ethernet ports labeled Option let you connect the wireless controller to
a backbone (requires DWC-1000-VPN-LIC License Pack upgrade). Each port has an
Activity LED (left) and Link LED (right).
The RJ-45 console cable lets you connect a PC to access the wireless controller's
command-line interface.

Rear Panel

Press and hold for 10 seconds to reset the switch back to the factory default settings.
Connect the supplied power cord to a power outlet or surge protector.
Press to turn the wireless controller on and off.
3
1
4 5
3 2
18