All Logs; Current Logs - D-Link DWC-1000 User Manual

Section 10 - Troubleshooting
Path: Status > System Information > All Logs > Current Logs
The Display Logs window allows you to view configured log messages from the controller as they appear. Each
log will appear with a timestamp as determined by the controller's configured time. If remote logging such
as a Syslog server or e-mail logging is configured, the same logs are sent to the remote interface while being
displayed here. The logs are displayed based on the selection of facility, category, and severity levels.
Click Refresh to refresh logs or reload page again.
•
• Click Clear All to remove all entries in the Display Logs screen.
Click Send Logs to send all logs in the Display Logs screen to pre-configured e-mail recipients.
•
Click Export Logs to export/save the current log entries to a file.
•
Field
Facility Level
Category
Severity Level
The List of Current Logs window allows you to view configured log messages from the router as they appear. Each log
appears with a timestamp as determined by the router's configured time and based on the selection of facility, category,
severity levels combination. If remote logging such as a syslog server or e-mail logging is configured, the same logs are
sent to the remote interface while being displayed here .
D-Link DWC-1000 User Manual

All Logs

Current Logs

Filter the logs based on the facility level selected .
Filter the logs based on category selected .
Filter the logs based on the severity level selected .
List of Current Logs
Description
384