D-Link DWC-1000 User Manual page 31

Section 3 - Basic Configuration
Field
MAC Address MAC address of the access point.
Select standalone, managed, or rogue. Selecting standalone will require you to fill in the fields
below from Location to Expected Wired Network Mode.
AP Mode
Location Optional field to identify location of the access point being managed.
If AP Mode = Standalone, the SSID that the access point should be set to is displayed. This is for
Expected SSID
reference only.
If AP Mode = Standalone, the channel to be used for wireless communication is displayed. This
Expected Channel
is for reference only.
Expected WDS If AP Mode = Standalone, the WDS (Wireless Distributed System) mode to be used if you intend
Mode
to use WDS. This is for reference only.
Expected Security
If AP Mode = Standalone, the security mode to be used is displayed. This is for reference only.
Mode
Expected Wired If AP Mode = Standalone, select whether wired networking is going to be allowed. This is for
Network Mode
reference only.
Authentication If AP Mode = Managed, turn on to require a password for authentication.
Profile If AP Mode = Managed, select a profile to apply for AP configuration.
If AP Mode = Managed, this is Wireless radio mode that the access point is using is displayed. The
Radio
fields below appear after you have selected Managed AP Mode.
Channel If AP Mode = Managed, this is operating channel for the radio.
Power If AP Mode = Managed, this is percentage of power to use for the radio.
4. Repeat steps 2 and 3 for each additional access point you want the wireless controller to manage.
D-Link DWC-1000 User Manual
• Standalone
• Managed = Access point profile configuration has been applied to the access point and the
access point is operating in the managed mode.
• Rogue = Access point has not tried to contact the wireless controller and the access point's
MAC address is not in the Valid AP database.
Description
31