D-Link DWC-1000 User Manual page 386

Appendix A - Basic Planning Worksheet
Step
1 Height of building
2
Width of building
3 Number of floors
4 Floor dimensions
5 Distance between floors
6
Visual obstructions
7 Possible causes of interference
1
Frequency band
2 Expected signal quality
3 Number of clients per access point
4
Total number of clients per floor
5
Desired access point data rate
Change the wireless controller default password and record it here:
1
Configure your time zone and record it here___________________
2
Use default radio configuration?
Profile Name: ___________________________________________
Clients ________________________________________________
Modes Available:
802.11 b/g:
3
802.11 n:
802.11 b/g/n:
802.11 a – 5 GHz Only:
802.11 a/n – 5 GHz Only:
802.11 a/n/ac - 5 GHz Only:
SSID information
4
Service Set Identifier (SSID) name:_________________________________
Security (none, WEP, WPA, or WPA2):________________________________
Use wireless controller as a DHCP server?
Yes = host name and IP address should be assigned dynamically.
No = use DHCP relay or configure static IP addresses and record them below.
IP address:
5
IP subnet mask:
Gateway IP address:
Primary DNS server:
Secondary DNS server:
D-Link DWC-1000 User Manual
Task
Site Planning
Access Point Planning
Wireless Controller Planning
Completed?
386