D-Link DWC-1000 User Manual page 225

Section 6 - Securing Your Network
Field Description
LDAP Server Settings
Server Check Checks status of configured servers, it checks whether servers are up or not.
These are attributes related to LDAP users configured in LDAP server. These may
LDAP Attribute 1-4
include attributes like SAM account name, Associated domain name etc. These can
be used to distinguish between different users having same user name.
LDAP authentication requires the base domain name; contact your administrator for
LDAP Base DN
the Base DN to use LDAP authentication for this domain.
Set the amount of time in seconds, the controller should wait for a response from the
Timeout
LDAP server.
This determines the number of tries the controller will make to the LDAP server
Retries
before giving up.
Admin account in LDAP server that will be used when LDAP authentication is required
Administrator Account
for PPTP/L2TP connection.
Password Enter the admin password.
LDAP Server List
Name Displays the names of the LDAP Servers.
IP Address The IP address of the respective LDAP Server is also displayed.
D-Link DWC-1000 User Manual 225