Appendix E: Cli Error Messages - Lenovo ThinkServer RD650 User Manual

12Gb/s MegaRAID SAS Software User Guide
March 2014

Appendix E: CLI Error Messages

This appendix lists the MegaRAID Storage Manager software error messages.
The Storage Command Line Tool (StorCLI) and the MegaCLI Configuration Utility are command line interface
applications you can use to manage MegaRAID SAS RAID controllers.
E.1 Error Messages and Descriptions
Each message that appears in the event log has an error level that indicates the severity of the event, as shown in the
following table.
Table 84 Error Messages and Descriptions
Number
0x00
0x01
0x02
0x03
0x04
0x05
0x06
0x07
0x08
0x09
0x0a
0x0b
0x0c
0x0d
0x0e
0x0f
0x10
0x11
0x12
0x13
0x14
0x15
0x16
0x17
0x18
0x19
0x1a
0x1b
Event Text
Command completed successfully
Invalid command
DCMD opcode is invalid
Input parameters are invalid
Invalid sequence number
Abort isn't possible for the requested command
Application 'host' code not found
Application already in use - try later
Application not initialized
Given array index is invalid
Unable to add missing drive to array, as row has no empty slots
Some of the CFG resources conflict with each other or the current config
Invalid device ID / select-timeout
Drive is too small for requested operation
Flash memory allocation failed
Flash download already in progress
Flash operation failed
Flash image was bad
Downloaded flash image is incomplete
Flash OPEN was not done
Flash sequence is not active
Flush command failed
Specified application doesn't have host-resident code
LD operation not possible - CC is in progress
LD initialization in progress
LBA is out of range
Maximum LDs are already configured
LD is not OPTIMAL
LSI Corporation
- 400 -
Appendix E: CLI Error Messages