Lenovo ThinkServer RD650 User Manual page 231

***MainBookTitle***
***ReleaseDate***
To abort the discovery process which has already begun, select the Stop discovery process of remote servers
check box and click Save Settings. This check box is enabled only when there is a active discovery process.
4. Double-click the icon of the server that you want to access.
The Server Login window appears.
Figure 121 Server Login
5. Enter the root account name and password of the host in the User Name and Password fields respectively.
The question mark icon opens a dialog box that explains what you need for full access to the server and for
view-only access to the server. You are allowed three attempts to Log in.
6. Select an access mode from the drop-down menu for Login Mode, and click Login.
Select Full Access if you need to both view and change the current configuration.
—
Select View Only if you need to only view and monitor the current configuration.
—
Enter the root or administrator user name and password to use Full Access mode.
NOTE For the VMware ESXi, the server icon does not denote the health of the
server. The icon is always green regardless of the health of the system.
The VMware server does not show the system health and the
operating system labels. It shows only the host name and the IP
address of the server. When connecting to a VMware server on a
different subnet, one or more frameworks have to be running in the
subnet to connect to the CIMOM.
NOTE In the User Name field, you can also enter the domain name along
with the user name; for example, LSI\abc, where LSI is the domain
name and abc is your user name.
NOTE When connected to VMware operating system, the Server Login
window shows only one label for access, Full Access. Multiple users can
have full access to the VMware server.
NOTE If the computer is networked, this login is for the computer itself, not
the network login.
***Confidentiality***
- 231 -
Chapter 8: MegaRAID Storage Manager Window and Menus
Discovery and Login