Lenovo ThinkServer RD650 User Manual page 372

12Gb/s MegaRAID SAS Software User Guide
March 2014
Number
0x01aa Critical
0x01ab Progress
0x01ac Information
0x01ad Information
0x01ae Warning
0x01af Warning
0x01b0 Information
0x01b1 Warning
0x01b2 Fatal
0x01b3 Information
0x01b4 Information
0x01b5 Critical
0x01b6 Progress
0x01b7 Information
0x01b8 Information
0x01b9 Warning
0x01ba Information
0x01bb Information
0x01bc Information
0x01bd Warning
0x01c2 Information
0x01c3 Information
0x01c4 Information
0x01c7 Warning
0x01c8 Critical
Severity
Event Text
Level
Erase failed on %s
Erase progress on %s is %s
Erase started on %s
Erase complete on %s
Potential leakage during erase on %s Logged to inform the Potential leakage during erase on an
Battery charging was suspended due
to high battery temperature
NVCache firmware update was
successful
NVCache firmware update failed
%s access blocked as cached data in
CacheCade is unavailable
CacheCade disassociate started on
%s
CacheCade disassociate completed
on %s
CacheCade disassociate failed on %s This event is not reported to the user.
CacheCade disassociate progress on
%s is %s
CacheCade disassociate aborted by
user on %s
Link speed changed on SAS port %d
and PHY %d
Advanced Software Options was
deactivated for - %s
%s is now accessible
%s is using CacheCade
%s is no longer using CacheCade
Patrol Read aborted on %s
Periodic Battery Relearn was missed,
and rescheduled to %s
Controller reset requested by host
Controller reset requested by host,
completed
Controller booted in headless mode
with errors
Controller booted to safe mode due
to critical errors
Generic Conditions when Each Event Occurs
Logged when the Erase is failed on an LD.
Logged to display the Erase progress on an LD along with its
current progress.
Logged when the Erase is started on an LD.
Logged when the Erase is complete on an LD.
LD.
Logged when the Battery charging was suspended due to
high battery temperature.
This event is not reported to the user.
This event is not reported to the user.
This event is not reported to the user.
This event is not reported to the user.
This event is not reported to the user.
This event is not reported to the user.
This event is not reported to the user.
Logged when the Link speed changed on SAS port and PHY.
This event is not reported to the user.
This event is not reported to the user.
This event is not reported to the user.
This event is not reported to the user.
Logged when the Patrol Read is aborted on a PD.
Logged if Battery Relearn was missed at the scheduled time
due to a system power off then the controller will reschedule
automatically when you power on the system.
Logged when the Controller Reset process started on the
corresponding controller.
Logged when the Controller Reset process completed on the
corresponding controller.
Logged when the Controller is booted to safe mode due to
warning errors.
Logged when the Controller is booted to safe mode due to
critical errors.
LSI Corporation
- 372 -
Appendix A: Events and Messages